Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer1 Scope This International Standard specifies a method for the measurement of the reflectance characteristics of high gloss anodized aluminium surfaces. The method described is also suitable for the measurement of the reflectance characteristics of other high gloss metal surfaces. The method is not suitable for diffuse finish metal surfaces and does not measure colour.

with cruciate slot or cross-recessed heads

BS EN ISO 16104:2003 was developed to provide requirements and test procedures to meet the multi-modal United Nations Recommendations on the Transport of Dangerous Goods - Model Regulations and successful passing of the tests may lead to the allocation of an appropriate packaging mark (e

with left-hand thread

It is applicable to devices intended for use with or without nicotine content in the aerosol produced

2 Types of lines

This part of IEC 61400

The methods apply to wood flooring installed on a non-continuous support and thus assuming static loadbearing conditions

Why should you use BS EN 12759 – Liquid resistance of coated fabrics

Classification: 1 550 MPa 1) / 600 °C 2)

BS EN 2794-003 is a standard that covers single pole circuit breakers for aerospace applications to ensure the prevention of electrical failures in aerospace electrical systems

Why should you use ISO 16424‒ Homogeneity of Gd distribution and Gd2O3 content

temporarily or permanently