Lectrosonics A8U Kit - UHF Whip Antenna with Cutting KitThis antenna includes a full size cutting template used to cut the length of the whip for a particular frequency. Lay the uncut antenna on top of the drawing and trim the whip length to the desired frequency. After cutting the antenna to the desired length, mark the antenna by installing a color cap or sleeve to indicate the color listed in the table included. The supplied caps can be used several different ways: 1) A color cap on the end of the whip

purchased the tooling and trademark for the Model 180 in 1991 and produced an updated version of the Starbird in their California facility until 2010

The microphone heads come with a set of 5 foam inlays to be exchanged when they are worn out

The panels can be installed easily and arranged in a multitude of attractive patterns

High Audio Output Power

FeaturesLargest Selection of Microphone Adapters

and OLED display

Soft and non-abrasive

Dub from USB flash drive and recording from LINE Inputs

With up to 96 IP remote controllers over a standard TCP/IP network

Sidechain Filter for precise frequency control

12mm Plywood Construction Armored in Rigid Laminate

The ESOTEC HF driver spells quality and headroom due to a dynamic headroom of 1000W