Wiegand RFID Reader compatible with 26-bit HID 125kHzWiegand RFID Reader compatible with only 26 bit HID 125kHz Cards. Control wires available for LED (Change from red to green) and Buzzer control. 6 pin connector is added to the reader for pairing with: HTD 008 A: 1 Wire Output Conversion Cable, DC to DC converter, Power Enable, LED and Buzzer Control HTD 009 A: UART TTL Output Conversion Cable, DC to DC converter, Power Enable, LED and Buzzer Control HTD 010 A: RS232 Output Conversion Cable, DC to DC

Cable is 1 meter in length with pins 1

Temp Probe 1 in chain requires cable SKU: HTC-007 to connect Ground and 1-Wire communication

and sends the ID to a 1-Wire interface utilizing iButton protocol

while the OBDII extension is 4ft in length

9-pin J1939 Type I connector 'Y' cable to 16-pin dual row connector for CalAmp LMU3640/Veosphere devices

28ft) in length with connections populated for Power

Or the extensions can be connected together between 2 of the HTS-014 in order to make a longer length between 2 of the HTS-014 temperature probes

Control wires available for LED (Change from red to green) and Buzzer control

Provides a enable line to control power to the reader

Cable is 2 meters in length with 4 connections populated

Convert input voltage from 10-30VDC down to the proper DC level to power the RFID reader

The 1-Wire Output Cable models will work with all of our Wiegand output readers: