MTM Hydro 3/8" Adjustable Chemical Injector with 1.8mm OrificeDescription MTM Hydro's Fixed Chemical injectors were developed for use in a downstream chemical injection system. Downstream refers to 'after the pump and unloader' where the injector operates through the use of the Venturi effect. When the low pressure side of a dual lance is opened, the chemical injector's orifice is, then, the point of restriction which immediately creates a vacuum and begins drawing chemical. All MTM Hydro chem injectors have a

Interchangeable spindles are easy to change

An easy-to-use

(1) Hydraulic Shop Press

Easy to clean

: 103190396CRT-002)

1 - Collapsible Container

Carbide-Tipped Miller & Full-Carbide Miller cutters

SmartControl:

140° F - Max Water Temp | 1/2” F - Inlet Thread | 3/8”F - Discharge Thread | 4

For Use With For Use With Mesh Size 60 Type Replacement Element

) 43 x 25 x 44 Full Grinding Plane (W x L) (In

Pick your preferred drum lining