Rack mount for Home Assistant Green (Modular)3D Printed 1RU rack mount for the Home Assistant Green. This is part of our ModMount Range, so you can mix and match your parts! This item is Omni directional, so you can use it on the left or right side. NOTE: You will need to pair this with another ModMount item (Like a Blanking Plate) to make a full 1RU Width, screws are included to join the parts. The Home Assistant Green slides into the frame from the front with a snug fit. This listing is just

The Raspberry PI is mounted onto a removable sled so that they are easy to remove

The Switch slides into the frame from the back after removing the back plate

If you are going to use a Fan grill

Your Router slides into the frame from the front and the Rack mounting arms screw into the side of the frame using the supplied screws

any photos showing other devices etc are just for example

Each "Socket" has the following dimensions:

Case comes with M3 nuts heatset into the bottom

and they arrived here (rural Victoria) on Tuesday

Your Switches slide into the frame from the back after removing the back retaining plates and the Rack mounting arms screw into the side of the frame using the supplied screws

Also includes a Keystone Port so you can add a keystone socket to route the network cable around to the front (Keystone Socket/Cable optional extra)

3D Printed 1RU rack mount for the Firewalla Purple / Purple SE

other photos showing other accessories or electronic devices are just for example