LB120-25.5 | LB120 Light Balancing Filter (Minus Red)The MidOpt LB120 25. 5 is used to raise color temperature by reducing unnatural red tones created by some sodium and mercury lighting. LB120 filters are placed over the camera change and shift the apparent color by 120 mired. All MidOpt filters can also be purchased unmounted and in custom dimensions upon request from Machine Vision Direct. Technical Specifications Specifications + Useful Range Min 400 nm Useful Range Max 700 nm Stabledge Yes Adhesive

9 mm Weight 76 Grams Filter Thread No Filter Threads Light Color White Operating Temperature Range 0 to 40°C Storage Temperature Range 0 to 50°C Supply Voltage 24 Volts Power Consumption Maximum 4 Watts LED Current 40 mA Operating Relative Humidity (%) 20-85 Non Condensing Installation Location Indoor Use Only Risk Group According To CEI EN 62471:2010 Risk Group 1 AoV 60 ° FoV Minimum 25 FoV Maximum ∞ Focus Control Manual

6 x 24 x 24 mm Front Diameter 24 mm Weight 120 Grams Filter Thread No Filter Threads Operating Temperature Range 0 to 40°C Storage Temperature Range 0 to 50°C Operating Relative Humidity (%) Not Specified Installation Location Not Specified Temperature Sensor No FoV @ 1/2

The LSR150-470-W Bar light from Smart Vision Lights is part of SVL's flagship full-featured linear light series

APG 500126

Brand Advanced Illumination Series AL-S025300 Wavelength 940 Color Infra-Red (IR) Driver 0 Ingress Protection IP67 Length 300 mm Lens WIDE Weight 250g Can Be Strobed Yes Can Be Overdrive Strobed Yes Can Be Constantly On Yes Can Be Dimmed Dimmable Connection M12 5 Pole Full Description

6 W Max Strobe Latency 10 us Max Strobe Duration No Limit Max Strobe Frequency 4000 Hz Max Strobe Duty Cycle 100 % Min Strobe Duration 30 ms Max Overcurrent Strobe Current 3100 mA Max Overcurrent Strobe Latency 6 us Max Overcurrent Strobe Duration 50 ms Max Overcurrent Strobe Frequency 4000 Hz Max Overcurrent Strobe Duty Cycle 10 % Min Overcurrent Strobe Duration 30 ms Max Overcurrent Strobe Input Power 74 W Max Duty Cycle 100 % PNP Trigger Voltage 4-24 VDC V PNP Trigger Current 17

Specifications + Useful Range Min 400 nm Useful Range Max 2000 nm Adhesive Backed Yes Tolerance 5 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Clear Glass Filter Diameter M25

2 μm Mount C-Mount Dimensions Approximate 155

Brand Advanced Illumination Series DL151 Wavelength 940 Color Infra-Red (IR) Driver I3S Ingress Protection Not Rated Length 16 in Weight 662g Can Be Strobed Yes Can Be Overdrive Strobed Yes Can Be Constantly On Yes Can Be Dimmed Dimmable Connection 2M Flying Lead Full Description

Thread Size Part Number 49mm RA060-49 52mm RA060-52 55mm RA060-55 58mm RA060-58 62mm RA060-62

DF241-39525I3S Specifications:

Brand Advanced Illumination Series LL137 Wavelength 455 Color Royal Blue Driver 24 Ingress Protection IP50 Length 30 in Lens Focus E Weight 3692g Can Be Strobed No Can Be Overdrive Strobed No Can Be Constantly On Yes Can Be Dimmed Not Dimmable Connection 2M Flying Lead Full Description