Methods for the sampling and analysis of tin and tin alloys - Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)What is BS 3338 13 Tin and tin alloys about? BS 3338 13 standard is a part of the BS 3338 series that discusses the determination of antimony in solder and white metal bearing alloys using the volumetric method for the sampling and analysis of tin and tin alloys. Tin is alloyed with lead to produce solders with melting points lower than those of either tin or lead. Small amounts of various metals, notably antimony and silver, are added to tin lead

PD CEN/TS 17249-5 defines the additional high-level service requirements for making the provision of eCall to powered two-wheel vehicles of UNECE Category L1 and L3 (vehicle-mounted)

The damage is assessed visually and by the loss of tensile strength

Aluminium alloys have corrosion resistance properties

and vehicle products which are used as parts in the interior of vehicles

The Met Office

Specification for the planning

The main goal of PD IEC TR 61000‑1 is to determine or verify the existing phase angle (mainly of the 5th harmonic) and to assess the possible influences of future developments – such as changes in lighting types and other electronic equipment

with consideration of scale effect including the effect of surface roughness

Annex D (normative) Requirements for factory production control

This standard is applicable to stationary hydrogen generators intended for indoor and outdoor commercial

Who is ISO 21613‒ Determination of chlorine and fluorine for

• Test specimen