SPL Parts 03-08 Nissan 350Z Rear Camber Links (Billet Version)370Z G37 Rear Camber Links (RLL) allow for an increased range of rear camber adjustment, which is necessary for lowered cars and for performance alignments. These arms are designed for use in high performance street and race vehicles. A lowered 370Z or G37 will need adjustment to get camber back in spec to ensure proper tire wear and handling due to aggressive factory camber curves. Small changes to ride height will affect camber settings. Our latest

EASIER TO MOUNT

Toyota MR2 USDM (SW20) from 1993 to 1995

The R35 GTR Rear Camber Arms for  feature ultra light construction: Billet 6061-T6 aluminum with our exclusive 4130 Chromoly Double Adjuster offers quick and precise adjustment for accurate alignment

lowering the vehicle approximately 3-inches while still retaining full shock travel

Billet Drain plug included

the factory air flow meter would need to be kept in place to use the IAT sensor

If higher boost pressures are required then an aftermarket external MAP sensor may be used and connected to the factory MAP sensor wiring

allowing you to change front caster to optimize the turn-in response and to compensate for variances between the left and right caster

should be installed just prior the throttle body even on models that have a factory fitted IAT sensor near the airbox

This is suitable for up to 175kpa (11psi) boost

and then lock your alignment settings in place with an allen wrench

WHAT IS A WIDEBAND UEGO AIR/FUEL CONTROLLER