Characterization of waste - Leaching behaviour test - Up-flow percolation test (under specified conditions)1 Scope This European Standard is applicable for determining the leaching behaviour of inorganic and non volatile organic substances from granular waste (without or with size reduction (see 7. 2)). The waste body is subjected to percolation with water as a function of liquid to solid ratio under specified percolation conditions. The waste is leached under hydraulically dynamic conditions. The method is a once through column leaching test and the test

Term number 3

but does not provide guidance on assessing the effects of changes in the external noise levels to occupants of an existing building

Auxiliary motors not covered by IEC 60034 - Motors for driving compressors

enabling you to test for gases such as TGA

Following the specifications provided in BS 4185-1

NOTE It is not recommended that torsion springs be loaded in the opposite direction to that of coiling

01 to 1 TiO2 0

for which the main requirement is their creep resistance under mechanical long-time stressing at temperatures above 500 °C

It consists of a code table and a legend showing each graphic and its name

This British Standard specifies the requirements for the manufacture of structural components which have been designed using either:

BS EN 9300-005 introduces a concept of verification levels

0 ng/l to 10 000 ng/l for PFOS and 10 ng/l to 10 000 ng/l for PFOA