ER-Collet with seal for IC ER32 | 470EH | < 15µm | Ø 11Application: Collets sealed for high pressure cooling 120 bar with IC DIN 6499 B (ISO 15488 B) ER system Note: Only nominal size d can be clamped (applicable up to 120 bar). In order to achieve an optimum sealing the tool must be clamped on the complete length of the ground drill of the collet.

Unit Selection : Nm

in wooden box 701

Instruction manual

4021 x 20Cr13

- Bed height H: 0

Powder-coated

For mounting the coolant tubes in PSK toolholders

For mounting screw-in cutters with thread

Mode : Peak

The tool inserts are made of oil-resistant

0V Battery

Soft body for later processing