Arduino Wemos D1 WiFi Development BoardThe WeMos D1 is a WiFi based ESP8266 board with an Arduino layout and a 3. 3V operational voltage. The ESP8266 chip (a 32 bit processor) controls the board, which has a greater flash memory than an Arduino Uno. This board works with both the Arduino IDE and NodeMCU. The D1 R2 also has an integrated switching power supply, allowing it to be powered from a power supply up to a 12V DC supply. USB to Serial converter CH340G IC available on the board. The

Voltage 220-240V AC Detection Range 360° Detection Distance 1-8m Power frequency 50/60Hz Ambient Light 3~2000 LUX Time Delay Min

Linearity of 12 bits

as in a small scale

such as microwave ovens

Length 90 meter Insulation Type PVC Wire Gauge 23 AWG

This is a Aluminum Heat Sink is 47 x 40 x 15 mm (L x W x H) and can be used for a variety of Applications

There is a key emergency stop function (STOP key)

‚¬€�� Peripheral features

Instantaneous Forward Voltage 1V Max

>20kHz in resonant mode)

Some load cell designs use gauges that are never subjected to any force but only serve to counterbalance the temperature effects on the gauges that measure force

of PWM pins 3 Onboard Regulator 150mA